Front-End electronics configuration system for CMS

The four LHC experiments at CERN have decided to use a commercial SCADA (Supervisory Control And Data Acquisition) product for the supervision of their DCS (Detector Control System). The selected SCADA, which is therefore used for the CMS DCS, is PVSS II from the company ETM. This SCADA has its own database, which is suitable for storing conventional controls data such as voltages, temperatures and pressures. In addition, calibration data and FE (Front-End) electronics configuration need to be stored. The amount of these data is too large to be stored in the SCADA database [1]. Therefore an external database will be used for managing such data. However, this database should be completely integrated into the SCADA framework, it should be accessible from the SCADA and the SCADA features, e.g. alarming, logging should be benefited from. For prototyping, Oracle 8i was selected as the external database manager. The development of the control system for calibration constants and FE electronics configuration has been done in close collaboration with the CMS tracker group and JCOP (Joint COntrols Project)(1). (1)The four LHC experiments and the CERN IT/CO group has merged their efforts to build the experiments controls systems and set up the JCOP at the end of December, 1997 for this purpose.Comment: 3 pages, 4 figures, Icaleps'01 conference PSN WEDT00

Data acquisition software for the CMS strip tracker

The CMS silicon strip tracker, providing a sensitive area of approximately 200 m2 and comprising 10 million readout channels, has recently been completed at the tracker integration facility at CERN. The strip tracker community is currently working to develop and integrate the online and offline software frameworks, known as XDAQ and CMSSW respectively, for the purposes of data acquisition and detector commissioning and monitoring. Recent developments have seen the integration of many new services and tools within the online data acquisition system, such as event building, online distributed analysis, an online monitoring framework, and data storage management. We review the various software components that comprise the strip tracker data acquisition system, the software architectures used for stand-alone and global data-taking modes. Our experiences in commissioning and operating one of the largest ever silicon micro-strip tracking systems are also reviewed

Constraining the contribution of Gamma-Ray Bursts to the high-energy diffuse neutrino flux with 10 yr of ANTARES data

Addressing the origin of the astrophysical neutrino flux observed by IceCube is of paramount importance. Gamma-Ray Bursts (GRBs) are among the few astrophysical sources capable of achieving the required energy to contribute to such neutrino flux through pγ interactions. In this work, ANTARES data have been used to search for upward going muon neutrinos in spatial and temporal coincidence with 784 GRBs occurred from 2007 to 2017. For each GRB, the expected neutrino flux has been calculated in the framework of the internal shock model and the impact of the lack of knowledge on the majority of source redshifts and on other intrinsic parameters of the emission mechanism has been quantified. It is found that the model parameters that set the radial distance where shock collisions occur have the largest impact on neutrino flux expectations. In particular, the bulk Lorentz factor of the source ejecta and the minimum variability time-scale are found to contribute significantly to the GRB-neutrino flux uncertainty. For the selected sources, ANTARES data have been analysed by maximizing the discovery probability of the stacking sample through an extended maximum-likelihood strategy. Since no neutrino event passed the quality cuts set by the optimization procedure, 90 per cent confidence level upper limits (with their uncertainty) on the total expected diffuse neutrino flux have been derived, according to the model. The GRB contribution to the observed diffuse astrophysical neutrino flux around 100 TeV is constrained to be less than 10 per cent

Commissioning and Calibrating the CMS Silicon Strip Tracker

The data acquisition system for the CMS Silicon Strip Tracker (SST) is based around a custom analogue front-end ASIC, an analogue optical link system and an off-detector VME board that performs digitization, zero-suppression and data formatting. A complex procedure is required to optimally configure, calibrate and synchronize the 107 channels of the SST readout system. We present an overview of this procedure, which will be used to commission and calibrate the SST during the integration, Start-Up and operational phases of the experiment. Recent experiences from the CMS Magnet Test Cosmic Challenge and system tests at the Tracker Integration Facility are also reported

Monitoring the CMS strip tracker readout system

The CMS Silicon Strip Tracker at the LHC comprises a sensitive area of approximately 200 m2 and 10 million readout channels. Its data acquisition system is based around a custom analogue front-end chip. Both the control and the readout of the front-end electronics are performed by off-detector VME boards in the counting room, which digitise the raw event data and perform zero-suppression and formatting. The data acquisition system uses the CMS online software framework to configure, control and monitor the hardware components and steer the data acquisition. The first data analysis is performed online within the official CMS reconstruction framework, which provides many services, such as distributed analysis, access to geometry and conditions data, and a Data Quality Monitoring tool based on the online physics reconstruction. The data acquisition monitoring of the Strip Tracker uses both the data acquisition and the reconstruction software frameworks in order to provide real-time feedback to shifters on the operational state of the detector, archiving for later analysis and possibly trigger automatic recovery actions in case of errors. Here we review the proposed architecture of the monitoring system and we describe its software components, which are already in place, the various monitoring streams available, and our experiences of operating and monitoring a large-scale system

Spin-transfer in an open ferromagnetic layer: from negative damping to effective temperature

Spin-transfer is a typical spintronics effect that allows a ferromagnetic layer to be switched by spin-injection. Most of the experimental results about spin transfer are described on the basis of the Landau-Lifshitz-Gilbert equation of the magnetization, in which additional current-dependent damping factors are added, and can be positive or negative. The origin of the damping can be investigated further by performing stochastic experiments, like one shot relaxation experiments under spin-injection in the activation regime of the magnetization. In this regime, the N\'eel-Brown activation law is observed which leads to the introduction of a current-dependent effective temperature. In order to justify the introduction of these counterintuitive parameters (effective temperature and negative damping), a detailed thermokinetic analysis of the different sub-systems involved is performed. We propose a thermokinetic description of the different forms of energy exchanged between the electric and the ferromagnetic sub-systems at a Normal/Ferromagnetic junction. The corresponding Fokker Planck equations, including relaxations, are derived. The damping coefficients are studied in terms of Onsager-Casimir transport coefficients, with the help of the reciprocity relations. The effective temperature is deduced in the activation regime.Comment: 65 pages, 10 figure

Magnetic nanoconstrictions made from nickel electrodeposition in polymeric bi-conical tracks: Magneto-transport behavior

International audienceSingle nanoconstriction per magnetic wire is obtained by bi-conical track etching and electrodeposition. Magnetoresistance measurements at various angles result in irreversible jumps. Resulting jumps of magnetization have been attributed to the pinning and depinning of a constrained magnetic domain wall. a b s t r a c t In a cylindrical magnetic nanowire, a magnetic domain wall (DW) can move along the wire when an applied magnetic field or a spin-polarized current is applied. We show that in a magnetic device composed of two conical nanowires connected by a nanosized constriction, a DW can be trapped and detrapped. The magnetoreistance and the relaxation processes of the DW exhibit a specific behavior. Such a device has been fabricating by Ni electrodeposition in bi-conical tracks polymer membrane made of Swift Heavy Ions bombarded poly(VDF-co-TrFE) copolymer and poly(ethylene terephtalate) PET thin films. The latter method allows to monitor the conicity of the bi-conical wires and to give access to a panel of very well-defined structures.